Panel Lcd Display Profesional

 5. Front Panel : 

The front panel consists 2 parts: push button and display LCD set. The push button is used to turn on and off the UPS. LCD display indicates the load level; the battery voltage level and operation status of the UPS. Besides, when the system works abnormally, The LCD will display the fault code.

1. ON/MUTE Button
Turn on the UPS: 
Press and hold ON/Mute button for at least 2 seconds to turn on the UPS.
Mute the alarm : 
After the UPS is turned on in battery mode, press and hold this button for at least 5 seconds to disable or enable the alarm system. But it’s not applied to the situations when warnings or errorr occur.
Down key: 
Press this button to display previous selection in UPS setting mode.
Switch to UPS self-test mode: Press ON/Mute buttons simultaneously
for 5 seconds to enter UPS self-testing while in AC mode.

2. OFF/ENTER
Button
Turn off the UPS: Press and hold this button at least 2 seconds to turn off the UPS.
Confirm selection key : Press this button to confirm selection in UPS setting mode

3. SELECT Button (Switch LCD message) : 
Press this button to change the LCD message for input voltage, input frequency, battery voltage, output voltage and output frequency.

4. Setting mode :
Press and hold this button for 5 seconds to enter UPS
setting mode when UPS is off. Up key : Press this button to display next selection in UPS setting mode.

Panel LCD Display Explanation

UPS Setting