PRO801/Rack/Tower for 1kVA to 3kVA
model
&
PRO801/Rack/Tower for 6kVA to 10kVA
model
 |
| 2U rackmount |
Features
The Master Series (1P/1P) – 2-in-1 Rack/Tower is an true on-line double-conversion technology single-phase UPS system with 2U universal-mount case. It can be easily installed as a floor-standing tower or with a 19-inch rackmount bracket. The Master Series was designed with a high density output power factor of 0.9 to provide higher performance and efficiency to critical applications such as sensitive networks, small computer centers, servers and telecom applications. It is available in capacities from 1KVA to 10KVA with wide input voltage range and high accuracy output voltage to protect against the outages, disturbances and spikes.
The Master Series (1P/1P) - 2-in-1 Rack/Tower has been designed with a hot-swappable battery to ensure clean and uninterruptible power to protected equipment during battery replacement. A high voltage battery charger and battery extension assembly is available for the long run time applications. Parallel redundancy which will back up the load in the event of critical component failure is available for the 6kVA and 10kVA models. Front panel digital display can be easily adjusted through LCD setting to suit the installation format, whether it is left vertically standing or flat wall mounted.
 | |
| PRO801/1KVA/RS/RL: PRO8015/1.5KVA/RS/RL: PRO802/2KVA/RS/RL |
 |
| PRO803/3KVA/RS/RL |
1. Programmable outlets: Connect to non-critical loads
2. Output receptacles: Connect to mission-critical loads
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10.External battery terminal (only available for Long-run model)
11.Output IEC320-C20 connector
12.Fan
 |
| PRO806RS/RL & PRO810RS/RL |
Back Panel for 6kVA to 10kVA model1. Programmable outlets: Connect to non-critical loads
2. Output receptacles: Connect to mission-critical loads
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10. Battery connection
11. Input terminal
12. Fan
13. Parallel port (only available for parallel model)
14. External maintenance by-pass switch connection
15. Output Terminal
16. Ground
Optional :
- AS-400 Card (External alarm indicator).
- SNMP Card for data communication via network connection
- MODBUS Card (communication interface).
- Universal Rackmount Slider for installation in rack cabinets.
- External PDU & Maintenance Bypass Switch (Only suitable for UPS that are up to 3kVA).
- Maintenance Bypass Switch [MBS] (Only available in UPS ranging from 6 to 10kVA).
- External Automatic Transfer Switch (ATS).
SPESIFIKASI TEKNIS RACKMOUNT/1P/1P
2. Output receptacles: Connect to mission-critical loads
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10. Battery connection
11. Input terminal
12. Fan
13. Parallel port (only available for parallel model)
14. External maintenance by-pass switch connection
15. Output Terminal
16. Ground
Optional :
- AS-400 Card (External alarm indicator).
- SNMP Card for data communication via network connection
- MODBUS Card (communication interface).
- Universal Rackmount Slider for installation in rack cabinets.
- External PDU & Maintenance Bypass Switch (Only suitable for UPS that are up to 3kVA).
- Maintenance Bypass Switch [MBS] (Only available in UPS ranging from 6 to 10kVA).
- External Automatic Transfer Switch (ATS).
SPESIFIKASI TEKNIS RACKMOUNT/1P/1P
 |
| batterypack rackmount |
Tidak ada komentar:
Posting Komentar